The application of LED - Ningbo Seasight International Trading Co., Ltd.

Knowledge

The application of LED

LED's proprietary characteristics above mentioned determines their ideal suitability in a wide range of application.

Decorative lighting

Due to the rich variety in colors, small size, durability, energy savings, LEDs are perfect light source for decorative application. Attached on a PCB, flexible cable, or other desired materials; LEDs can be used for light source of channel letter, signs, border light, light tube and so on.

Illumination

With the advance of the white light LED technology, an array of white light LEDs assembled in a certain way are now bright enough to be used for domestic illumination, such as light, table lamp, and garden lamp etc.

Display

A typical application of LEDs is for message display or large-scale display screen, which are popularity used in sport fields, airports, business centers and so on. The largest LED display in the world is 36mm high, at Times Square,Manhattan.

LCD backlight

Because of LED's small size and low power consumption, they are perfect light source for LCD backlight.

Color

Monochromaticity is the inherent property of LEDs. They emit a pure color in a narrow frequency range. The color emitted from a LED is identified by peak wavelength(Ipk) and measured in nanometers(nm).Peak wavelength is a function of the LED chip material, the composition of the different materials determines the wavelength and therefore the color of light emitted.

As we know, white color is a combination of all colors. But eye does not require a mixture of all the colors of the spectrum to perceive white light.A mixture of three primary colors(red, green, blue) can be well enough.

Based on this principle, many solutions have been proposed to fabricate white color LEDs. The typical one is to bury a GaN type blue LED having an InGaN active layer into a YAG pond emitting yellow fluorescene.

Intensity an View Angle

LED light output varies with the type of chip, encapsulation, and other variables .But there is no consistent international criterion for LED brightness measurement. Generally, the amount of light emitted from a LED is quantified by a single point, on-axis luminous intensity value(IV), and is specified in millicandela(mcd).

A LED with higher luminous intensity value does not mean that it has higher total light output. To measure the total light output, the viewing angle must be taken into account too. LED viewing angle is also a function of the LED chip type an the epoxy lens that distributes the light, LEDs with different chips and epoxy lens will have different viewing angle. If two LEDs have the same luminious intensity value, the lamp with the larger viewing angle will have the higher total light output.

Parameter of typical LEDs:

Color	Chip material	If(ma)	VF(v)	LPK(nm)	LV(md)	View angle
Red	AIGanInP	20	2.0	620	1000-7000	15-120⁰
Orange	AIGanInP	20	2.0	605	1000-7500	15-120⁰
Yellow	AIGanInP	20	2.0	590	1000-8000	15-120⁰
Green	InGaN	20	2.0	520	1000-10000	15-120⁰
Blue	InGaN	20	2.0	470	1000-4000	15-120⁰
White	InGaN	20	2.0		1000-9000	15-120⁰

Pre Page: Features and Benefits of LED

Product (253)

Certificates (6)

Trade Show (1)

Services & Supports (3)

Management (1)

QA/QC (3)

Cooperation (1)

Knowledge (3)

Credit Report

Products Index

Company Info

Knowledge